Colors for Choice
Introduction
AURA Aroma Museo Diffuser (MD-10K) suits for larger commercial area . With advanced atomization technology. it turns the liquid essential oil into fragrance. Along with the air-flow, the fragrance will fill in all the area. The setting of concentration and timer can be adjusted with different requests. PCB program can be locked after operation to make it safer.
Attention:
Please read this manual in detail before using the device and keep it carefully.
1. Please read carefully before use and keep properly;
2. Please make sure the machine without any essential oil inside the bottle during transportation, so that to protect the machine from getting damaged and leaking;
3. Please make sure the machine upright to leaking and no down; or may damage the device and parts;
4. Please do not use the broken power wire and make sure the power supply is suitable for the machine, or may cause fire ;
5. Please do not open the machine by yourself, If any problems, please contact us promptly!
Instruction for adding and changing Essential Oil
1. For the first time to use the machine, please tighten the oil bottle before connecting power supply, Set the working time and adjust the aroma concentration.
2. If need to add or change the oil, please cut down the power supply. Then open the machine with the key, rotate the empty oil anticlockwise to take out the bottle to put the oil in and finally clockwise rotate the bottle and make sure it is tight. Then connect the power supply again.
Installation
Method of changing atomizing core
Parameters
Patent product design
1. International advanced atomization technology.
2. Professional Aluminum atomizer (atomizing oils more effectively)
3. Powerful long lifespan air pump
4. It can set up 4 group working periods with 7-day timer program to work automatically everyday !
5. After your setting, the PCB controller can lock the system, so to make the machine safe. And good for your rent service
6. It use long life Pump and International advanced atomization technology & aluminum atomizer
7. Electricity connection make the diffusion function more powerful to cover bigger area
1. Operating instructions:
① Connect the power cord to the power adapter (5V-1A).
② Insert the power cord into the DC POWER IN power inlet of the device.
③ Plug the power adapter into the power socket, and the device is powered on.
2. Control instructions:
Firstly to press [SET], the LCD display showed "hours" figure will flash, then press [UP/DOWN] to adjust hour. Press [SET] at second time. Hour adjustment finished. The minutes figure will flash, then press [UP/DOWN] to adjust the minutes. Press [SET] at the third time, Minutes adjustment finished.The indicated date will flash, press [UP/DOWN] to adjust the current date, finally press [SET] at fourth time, all function setting finished.
Set up the work time:
Set the working periods:
• Press the [ MODE ] key for the first time, the LCD display shows the factory-set time, and the machine can set 5 working time periods. Example: Set 08:00-10:00, 11:00-12:00, and 13:00-14:00. Over 00:00, just set two time periods, such as the first time period 08:00-23:58, the second time period 00:02-06:00.
• Press the [SET] key for the first time to enter the start working time setting of the first period of time, the hour start period number flashes, press the [UP/DOWN] key to adjust the hour start time; press the [SET] key for the second time, the hour starts After the time period is set, the number of minutes start time period flashes, press [UP/DOWN] key to adjust the time start time of minutes; press [SET] key for the third time, the minutes start time period is set, the group number flashes when the week matches, press [UP] The key displays the week date in the week column at the top of the LCD screen and flashes quickly to select the de-sired working week, and then presses the slow flash (or no display); to indicate that it is not selected, and then press [DOWN] to move to the right to continue setting other week combinations.
• Second time to press [MODE], the LCD display will show [EVENT 1 OFF] means the PAUSE TIME of first group. Then, press [SET] to do the program setting. Press [UP/DOWN ] to adjust hours, minutes.
• Third time to press the [MODE] key for the third time to set the device density. Press the [UP/DOWN] key to adjust the density and select the appropriate density. The concentration range is 5%-95%, starting from the minimum concentration of 5% and increasing up to the maximum concentration of 95% in a step of 5%.
Notice:
1. While setting working time, the off time cannot be earlier than on time.
2. It needs to set two separate run groups if run time across the 00:00.
3. 0n the initial page, Press [MODE] for 10 seconds to restore the factory settings.
4. Press SET for 10 seconds to lock/unlock the previous settings.
TIP:
If don't use the equipment for a long time, please clean the spray nozzle and internal parts. operation: add 95% alcohol to the empty oil bottle, set the machine to be 95% to work for 10-15 minutes . To clean the machine with 95% alcohol every two months.
HVAC Installation Technology (Compatibility Mode)
Step 1: First of all, contact the relevant person in charge of the property of the site, check the relevant drawings of the central air-conditioning system (or fresh air system) design, according to the layout and direction of the fresh air duct, (to know the specific room that needs to be scented, check the structure of the fresh air duct, determine the drilling hole location), determine the specific location and quantity of the installation of the perfuming equipment
Step 2: Select the appropriate machine model according to the space structure and area size of the fragrance place
Step 3: Determine the area covered by the central air-conditioning pipe, clarify the layout of the pipes in the room that needs to be scented, determine the specific location of the holes (depending on the actual room to be scented and the distribution of pipes), and use a drilling rig to drill holes on the determined pipes , and then insert the mist outlet pipe of the diffuser into the hole made by the fresh air duct, and finally seal the link hole with transparent glue and fix the mist outlet pipe.
Step 4: Find a suitable position to place the machine, fix the hanging board with screws, and then fix the machine (adhere to the principle of safety, can fall to the wall, not hanging, the screws must be fixed in place, so that it does not loosen), and finally, add For essential oils, set the running time and optimal fragrance concentration of the machine according to the space area and contract regulations, and then start the machine for trial operation and test to check whether the installation is correct and the fragrance concentration is appropriate.
Olivia Walker
